FREE
SHIPPING

  Loading... Please wait...
  • Kanger TOPBOX Nano Starter Kit
  • Kanger TOPBOX Nano Starter Kit - Back
  • Kanger TOPBOX Nano Starter Kit - Mod and Tank
  • Kanger TOPBOX Nano Starter Kit - Battery Compartment
  • Kanger TOPBOX Nano Starter Kit - Mod Connector
  • Kanger TOPBOX Nano Starter Kit - Tank Connector
  • Kanger TOPBOX Nano Starter Kit - Tank Open
  • Kanger TOPBOX Nano Starter Kit - Included Items

TOPBOX Nano Starter Kit

$109.95
Brand:
Quantity:

Product Description

The TOPBOX Nano Starter Kit from Kangertech is a kit which includes a Kanger KBOX Nano TC and a TOPTANK Nano. The KBOX Nano TC is a temperature control device with a maximum output of 60 watts. With an easy to read OLED screen display, you'll know exactly what's going on with a quick glance.

As mentioned, the TOPBOX Nano kit also includes the TOPTANK Nano. The TOPTANK Nano is a versitle tank that can be configured with several coil options. It uses the SSOCC line of coils from Kanger which includes coils ranging from 0.15 ohms to 1.5 ohms.

The TOPBOX Nano Starter Kit is available in black, pink and purple. If an option isn't shown above it is currently out of stock. Grab yours today!

NOTE: THIS KIT DOES NOT INCLUDE A BATTERY. ONE 18650 (HIGH DRAIN/HIGH AMP) IS REQUIRED TO OPERATE THIS DEVICE.

TOPBOX Nano Tank Features:

  • 3.2mL Juice Capacity
  • Top or Bottom Fill Design
  • Uses SSOCC Coils
  • Pyrex Glass Tube
  • Adjustable Air Flow
  • Replaceable Drip Tip

KBOX Nano TC Features:

  • Temperature Control
  • Wattage Range: 7-60W
  • Rates Resistance: > 0.1 ohm
  • OLED Screen
  • Spring Loaded 510 Connector
  • Short Circuit Protection
  • Over-Use Protection
  • Over-Current Protection
  • Replaceable 18650 Battery (not included)

Includes:

  • 1x KBOX Nano TC
  • 1x TOPTANK Nano
  • 1x SSOCC (0.15 ohm Ni200)
  • 1x SSOCC (0.5 ohm)
  • 1x SSOCC (1.5 ohm)
  • 1x Extra Pyrex Glass Tube
  • 1x USB Charging Cable
  • 1x Manual

To Fill a Kangertech TOPTANK Nano (top fill):

  • With the tank in an upright position, unscrew the top of the top cap
  • Fill juice in the outer slots (avoid the center tube)
  • Once filled, screw the top cap back on firmly

To Fill a Kangertech TOPTANK Nano (bottom fill):

  • Detach the tank from the battery
  • With the tank turned upside down, unscrew the base from the tank
  • Fill juice around the center tube (do not get juice inside the center tube)
  • Fill it until it touches the bar
  • Put the bottom cap back on the tank
  • Secure the bottom cap firmly

To Change a Kangertech TOPBOX Nano SSOCC Head:

  • Unscrew the bottom cap and pull out the coil assembly base
  • Unscrew the old coil from the assembly base and discard
  • Screw the new coil onto the assembly base
  • Drop approximately 3 drops directly into the top of the coil (primer drops)
  • Reinsert the coil assembly into the tank and secure the bottom cap

NOTICE:

  • This kit DOES NOT INCLUDE A BATTERY OR CHARGER. The KBOX runs on one 18650 with a minimum of 20A output. A suitable battery and charger are required and must be purchased separately if you don’t already have them.
  • This tank uses replaceable coils made specifically for this tank. You must purchase Kanger SSOCC heads when a coil needs to be replaced.

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

Write your own product review




Locations

We're Here to Help

(843) 732-VAPE
Mon-Fri 10am-5pm

Sign up to our newsletter