FREE
SHIPPING

  Loading... Please wait...
  • Kanger EVOD PRO Starter Kit - Assorted Colors
  • Kanger EVOD PRO Starter Kit - Black
  • Kanger EVOD PRO Starter Kit - Red
  • Kanger EVOD PRO Starter Kit - Stainless
  • Kanger EVOD PRO Starter Kit - White
  • Kanger EVOD PRO Starter Kit - Apart
  • Kanger EVOD PRO Starter Kit - Battery Cap Open
  • Kanger EVOD PRO Starter Kit - Battery Cap Closed
  • Kanger EVOD PRO Starter Kit - Battery Rattle Adjustment Removed
  • Kanger EVOD PRO Starter Kit - Charge Port
  • Kanger EVOD PRO Starter Kit - Charge Cable
  • Kanger EVOD PRO Starter Kit - Coil Outside
  • Kanger EVOD PRO Starter Kit - Coil Inside
  • Kanger EVOD PRO Starter Kit - Top Cap
  • Kanger EVOD PRO Starter Kit - Device with Box

EVOD PRO Starter Kit

$39.95
Brand:
Quantity:

Product Description

The Kangertech EVOD Pro Starter Kit is a device that has been specifically designed to hit more like a traditional cigarette. Kangertech is calling this MTL or mouth to lung. What this essentially means is that it is designed around a higher resistant coil that doesn't require as much airflow to create the cloud of vapor. You can simply draw the vapor into your mouth and then inhale it into your lungs; just like a traditional cigarette. For those I have lost, the other way of doing this would be direct to lung. Where the vapor is pulled from the device directly into your lungs. If this is more your thing, check out some of our sub ohm tanks and devices.

The EVOD Pro does require an external battery (not included), but this gives you more flexability and ensures that you don't have to replace you device when you battery eventually craps out. The device does have a USB port for charging, but we strongly recommend that you purchase a couple batteries and an external charger. This way you aren't locked to a cable and ensures you always have a battery on back up.

Available in four differnet colors, the EVOD Pro Starter Kit from Kangertech is ready to be your new all day vape device.

NOTE: THIS KIT DOES NOT INCLUDE A BATTERY. ONE 18650 (HIGH DRAIN/HIGH AMP) IS REQUIRED TO OPERATE THIS DEVICE. A BATTERY AND CHARGER CAN BE ADDED TO THIS ITEM USING THE OPTIONS ABOVE.

Features:

  • MTL Design
  • Built-in Tank
  • Replaceable Coils (CLOCC)
  • Runs on one (1) 18650 Cell (not included)
  • Short Circuit Protection
  • Over Charge Protection
  • Over Use Protection
  • Micro USB Charging Port
  • Resistance Range: 0.15 - 2.5 ohms

Includes:

  • 1x EVOD Pro Device
  • 1x CLOCC (1.0 ohm)
  • 1x Micro USB Charging Cable
  • 1x Manual

To Fill a Kangertech EVOD Pro Starter Kit:

  • Unscrew the top cap
  • Pull the coil assembly (attached to top cap) out of the tank
  • Fill juice to the Max Fill line (indicated on the side of the device)
  • Reinsert the coil assembly
  • Firmly screw in the top cap

To Change a Kangertech EVOD Pro Starter Kit CLOCC Head:

  • Unscrew the top cap
  • Pull the coil assembly (attached to top cap) out of the tank
  • Grab the coil head firmly
  • Unscrew the coil from the top cap and discard
  • Remove a new coil from it package
  • Screw the new coil into place on the top cap
  • Drop 2-3 drops of juice directly onto the wicks in the coil (primer drops)
  • Top off your tank (if needed)
  • Reinsert the coil assembly
  • Firmly screw in the top cap

NOTICE:

  • This kit DOES NOT INCLUDE A BATTERY OR CHARGER. The EVOD Pro runs on one (1) 18650 with a minimum of 20A output
  • A suitable battery is required and must be purchased separately if you don’t already have them.
  • An external battery charger is strongly recommended
  • This tank uses replaceable coils made specifically for this tank. You must purchase Kanger Subtank OCC heads when a coil needs to be replaced.

Find Similar Products by Category

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

Write your own product review


Customers Who Viewed This Product Also Viewed



Locations

We're Here to Help

(843) 732-VAPE
Mon-Fri 10am-5pm

Sign up to our newsletter